Molding

  1. Choose Project
  2. Choose Pattern
  3. Choose Color
  4. Add to Cart
  5. Add Molding

A tin ceiling without molding is like a picture without a frame. Offering a large selection of color matched finishes in a variety styles, all our molding is sold in 4 foot sections and is made out of the same .010 tin plated steel as our tin tiles. When selecting the style and size of your molding, it’s important to consider your room size, as large molding in a small room may look out of scale. Pre-cut miters and copes are available at no extra charge to ensure perfect corners.

What You Need to Know:

Installation – A dramatic frame for your finished ceiling installation, crown or cornice molding is designed to gracefully flare out to a finished edge where the ceiling meets the wall. We offer depths that range from 1 1/2" inches to 6 1/4". Flat molding is most commonly used as a transition between an embossed tin panel and filler. Flat molding ranges in width from 3 1/2" to 4 1/2". Used for corners of bars, down stairs or a ceiling that transitions into a vault, Girder Nose Molding is an attractive trim element for 90 degree angles. The perfect edge for a backsplash or wall application, our ultra-thin J Channel molding is designed to snap on and cover the edge of the exterior Nail-Up panel, slipping right into the 1/4" channel. Patterns – We offer 6 types of crown molding, 3 flat moldings and one girder nose molding as well as J Channel molding to finish backsplashes and wall applications. Colors – All moldings are available in all colors. Shop for Molding below:

 

Crown Molding (Cornice) 4' Length Sections

C1 Crown Molding
8 3/4" height (measurement of molding face)
6 1/4" concave projection (length from wall to molding edge and ceiling to molding edge - see diagram)
FREE inside and outside corner cuts available (please call for cuts)
C2 Crown Molding
6 1/2" height (measurement of molding face)
4 1/2" concave projection (length from wall to molding edge and ceiling to molding edge - see diagram)
FREE inside and outside corner cuts available (please call for cuts)
C3 Crown Molding
4 1/2" height (measurement of molding face)
3 1/4" convex projection (length from wall to molding edge and ceiling to molding edge - see diagram)
FREE inside and outside corner cuts available (please call for cuts)
C4 Crown Molding
2 1/2" height (measurement of molding face)
1 7/8" convex projection (length from wall to molding edge and ceiling to molding edge - see diagram)
FREE inside and outside corner cuts available (please call for cuts)
C7 Crown Molding
1 1/2" height (measurement of molding face)
1 1/2" convex projection (length from wall to molding edge and ceiling to molding edge - see diagram)
FREE inside and outside corner cuts available (please call for cuts)
C8 Crown Molding
4 1/2" height (measurement of molding face)
3" convex projection (length from wall to molding edge and ceiling to molding edge - see diagram)
FREE inside and outside corner cuts available (please call for cuts)
C9 Crown Molding
3 1/2" height (measurement of molding face)
2 3/8" convex projection (length from wall to molding edge and ceiling to molding edge - see diagram)
FREE inside and outside corner cuts available (please call for cuts)
C10 Crown Molding
3 1/2" height (measurement of molding face)
2 3/8" straight projection (length from wall to molding edge and ceiling to molding edge - see diagram)
FREE inside and outside corner cuts available (please call for cuts)

M1 Flat Molding
4 1/2" height (measurement of molding face)
FREE inside and outside corner cuts available (please call for cuts)
M2 Flat Molding
3 1/2" height (measurement of molding face)
FREE inside and outside corner cuts available (please call for cuts)
M3 Flat Molding

3 1/2" height (measurement of molding face)
FREE inside and outside corner cuts available (please call for cuts)

Girder Nose Molding 4' Length Sections

G1 Girder Nose Molding 'L' Girder Nose Molding

Edge Trim - 4' Sections

Edge Trim provides a professionally finished look by covering exposed outside edges. Best for backsplash, wall and wainscoting project. Sold in four foot lengths.

Inside Corner Trim - 4' Sections

Inside Corner Trim provides a finished transition to any 90 degree corner of your backsplash, wall or wainscoting project. Sold in four foot lengths.